转自:http://www.senra.me/compile-and-install-pcapdnsproxy-for-centos6/
下面为 centos:
1.准备程序编译环境:编译前需要使用包管理工具安装,或者需要自行编译和安装依赖库
- 依赖工具/库列表:
- GCC/g++ 可访问 https://gcc.gnu.org 获取
- GCC 最低版本要求为 4.9 从此版本开始 GCC 完整支持 C++ 11 标准,4.9 之前的版本对 C++ 11 标准的实现有问题
- GCC 当前版本可使用 gcc –version 查看,使用旧版本 GCC 强行编译可能会出现无法预料的问题!
- Bison 可访问 https://www.gnu.org/software/bison 获取
- M4 可访问 https://www.gnu.org/software/m4 获取
- Flex 可访问 http://flex.sourceforge.net 获取
- CMake 可访问 https://cmake.org 获取
- LibPcap 可访问 http://www.tcpdump.org/#latest-release 获取
- 获得 root 权限后使用 ./configure -> make -> make install 即可
- 部分 Linux 发行版可能还需要 LibPcap-Dev 工具的支持
- Libsodium 可访问 https://github.com/jedisct1/libsodium 获取
- 编译时如果剥离 Libsodium 的依赖则可跳过编译和安装下表的依赖库和工具,具体参见下文的介绍,不建议使用
- Libsodium 的编译和安装依赖 Automake/Autoconf 套装工具:
- aclocal
- autoscan
- autoconf 可访问 https://www.gnu.org/software/autoconf 获取
- autoheader
- automake 可访问 https://www.gnu.org/software/automake 获取
- libtool 可访问 https://www.gnu.org/software/libtool 获取
- 获得 root 权限后进入目录,运行 ./autogen.sh -> ./configure -> make -> make install 即可
- 部分 Linux 发行版可能还需要 Libsodium-Dev 工具的支持
- 部分 Linux 发行版可能还需要运行 ldconfig 刷新系统的库缓存
下载完毕后到解压目录先后执行 ./configure – make – sudo make install
2.编译 Pcap_DNSProxy 程序并配置程序属性
- 切勿更改脚本的换行格式 (UNIX/LF)
- 使用终端进入 Source/Scripts 目录,使用 chmod 755 CMake_Build.sh 使脚本获得执行权限
- 使用 ./CMake_Build.sh 执行编译程序
- 添加参数 –enable-static 即 ./CMake_Build.sh –enable-static 可启用静态编译
- 脚本所进行的操作:
- CMake 将编译并在 Release 目录生成 Pcap_DNSProxy 程序
- 设置 Pcap_DNSProxy 程序以及 PcapDNSProxyService 和 Pcap_DNSProxy.service 服务控制脚本的基本读写可执行权限
- 设置 Linux_(Un)Install.Systemd.sh 以及 Linux_(Un)Install.SysV.sh 服务控制安装脚本的基本读写可执行权限
- 从 ExampleConfig 复制默认配置文件到 Release 目录
- 执行时使用 ./CMake_Build.sh –disable-libsodium 可剥离 Libsodium 的依赖,不建议使用
- 剥离后编译时将不需要 Libsodium 库的支持
- 剥离后程序将完全失去支持 DNSCurve/DNSCrypt 协议的功能,且运行时将不会产生任何错误提示,慎用!
3.配置系统守护进程服务
- 由于不同的 Linux 发行版对系统服务和守护进程的处理方式不同,本步仅供参考
- 附带的 Linux_Install.Systemd.sh 脚本适用于默认使用 Systemd Init 的系统
- Linux Debian 8.x 官方发行版以及更新版本系统环境,经测试可直接使用
- 附带的 Linux_Install.SysV.sh 脚本适用于默认使用 System V Init 的系统
- Linux Debian 6.x – 7.x 官方发行版系统环境,经测试可直接使用
- 更多详情可参见下文其它 Linux 发行版服务的说明,以及所使用 Linux 发行版的官方说明
- 使用 Systemd Init 时:
- 进入 Release 目录并编辑 Pcap_DNSProxy.service 文件,编辑完成后保存:
- WorkingDirectory= 项为程序所在目录的绝对路径
- ExecStart= 项为程序所在目录的绝对路径,并在最后加上程序的名称
- 在 root 权限下使用 ./Linux_Install.Systemd.sh 执行服务安装脚本,脚本所进行的操作:
- 将 Pcap_DNSProxy.service 服务控制脚本的所有者更改为 root
- 安装服务控制脚本到 /etc/systemd/system 目录中
- 尝试启动 Pcap_DNSProxy 服务,并显示执行操作后服务的状态
- 以后每次系统启动都将自动启动服务
- 更多 Systemd 服务控制的方法,参见各 Linux 发行版官方文档的说明
- 使用 System V Init 时:
- 进入 Release 目录并编辑 PcapDNSProxyService 文件,编辑完成后保存:
- NAME 项为程序的名称
- PATH 项为程序的绝对路径
- 在 root 权限下使用 ./Linux_Install.SysV.sh 执行服务安装脚本,脚本所进行的操作:
- 将 PcapDNSProxyService 服务控制脚本的所有者更改为 root
- 安装服务控制脚本到 /etc/init.d 目录中
- 尝试启动 PcapDNSProxyService 服务,并显示执行操作后服务的状态
- 以后每次系统启动都将自动运行脚本启动服务
- 可直接输入 sh PcapDNSProxyService 不带参数查询用法
- start – 启动服务
- stop – 停止服务
- force-reload/restart – 重启服务
- status – 服务状态,如果 PID 为空则服务未启动
以上为该项目在Github上的说明文档,想要自己研究的可以去这看看:传送门
参照文档,我们首先需要解决的是GCC的问题,参照我之前写的一篇文章,我们选择devtoolset来获取高版本GCC,需要GCC4.9以上那我们就用devtool3
wget https://copr.fedoraproject.org/coprs/rhscl/devtoolset-3/repo/epel-6/rhscl-devtoolset-3-epel-6.repo -O /etc/yum.repos.d/devtools-3.repo
yum install devtoolset-3-gcc devtoolset-3-binutils devtoolset-3-gcc-c++ devtoolset-3-gcc-gfortran
ln -s /opt/rh/devtoolset-3/root/usr/bin/* /usr/local/bin/
hash -r
gcc –version
这里直接将devtoolset的gcc配置为默认gcc了,需要临时配置的可以参照我的文章
然后接下来其实有点套路,我把这些依赖的configure选项全看了下,发现好几个依赖需要m4,所以我最先装m4,当然在此之前我们最好配置下系统动态链接库
echo -e ‘/usr/local/libn/usr/local/lib64’ > /etc/ld.so.conf.d/local.conf
ldconfig
以下我选择的依赖基本是写文章时最新的stable版本(强迫症福利)
安装m4
cd /opt
wget https://ftp.gnu.org/gnu/m4/m4-1.4.17.tar.gz
tar xzf m4-1.4.17.tar.gz
cd m4-1.4.17
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
ldconfig
安装bison
cd /opt
wget https://ftp.gnu.org/gnu/bison/bison-3.0.4.tar.gz
tar xzf bison-3.0.4.tar.gz
cd bison-3.0.4
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
ldconfig
安装autoconf
cd /opt
wget https://ftp.gnu.org/gnu/autoconf/autoconf-latest.tar.gz
tar xzf autoconf-latest.tar.gz
cd au
toconf-*
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
安装automake
cd /opt
wget https://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
tar xzf automake-1.15.tar.gz
cd automake-1.15
./bootstrap.sh
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
安装libtool
cd /opt
yum install help2man texinfo -y
wget https://ftp.gnu.org/gnu/libtool/libtool-2.4.6.tar.gz
tar xzf libtool-2.4.6.tar.gz
cd libtool-2.4.6
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
安装libsodium(这玩意貌似不用autogen,直接configure也行,自己看着办)
cd /opt
wget https://github.com/jedisct1/libsodium/releases/download/1.0.11/libsodium-1.0.11.tar.gz
tar zxf libsodium-1.0.11.tar.gz
cd libsodium-1.0.11
./autogen.sh
./configure
make
make install
ldconfig
安装gettext(libsodium的autogen需要gettext,系统自带的版本不够)
yum install patch -y
cd /opt
wget https://ftp.gnu.org/gnu/gettext/gettext-0.19.8.1.tar.gz
tar xzf gettext-0.19.8.1.tar.gz
cd gettext-0.19.8.1
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure
make
make install
ldconfig
安装flex
yum install texinfo-tex -y
cd /opt
wget https://github.com/westes/flex/releases/download/v2.6.4/flex-2.6.4.tar.gz
tar xzf flex-2.6.4.tar.gz
cd flex-2.6.4
PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./autogen.sh
./configure
make
make install
ldconfig
安装cmake
cd /opt
wget https://cmake.org/files/v3.6/cmake-3.6.2.tar.gz
tar xzf cmake-3.6.2.tar.gz
cd cmake-3.6.2
./bootstrap
gmake
gmake install
ldconfig
安装libpcap
cd /opt
wget http://www.tcpdump.org/release/libpcap-1.7.4.tar.gz
tar xzf libpcap-1.7.4.tar.gz
cd libpcap-1.7.4
./configure –enable-ipv6
make
make install
ldconfig
千辛万苦终于把依赖搞定了,终于到了编译正主的时候了……正主倒是方便,有编译脚本,直接执行就行了,本来想编译成静态的,可惜貌似因为使用的动态库太多了,加了参数就报错……,不过我试了下把编译完的本体直接丢其它机器上,只要libsodium依赖,其它貌似都不用(如果需要其它的可以试试yum装下)
cd /opt
wget -O Pcap_DNSProxy_v0.4.7.0.tar.gz https://github.com/chengr28/Pcap_DNSProxy/archive/v0.4.7.0.tar.gz
tar xzf Pcap_DNSProxy_v0.4.7.0.tar.gz
cd Pcap_DNSProxy-0.4.7.0/Source/Scripts
chmod 755 CMake_Build.sh
./CMake_Build.sh
编译完的本体在Pcap_DNSProxy-0.4.7.0/Source/Release中,里面还有一堆配置文件以及启动脚本,然而启动脚本有点二……
我选择把程序和配置放到/etc/Pcap_DNSProxy文件夹中
mkdir /etc/Pcap_DNSProxy
cp ../Release/Pcap_DNSProxy /etc/Pcap_DNSProxy/
cp ../Release/*.conf /etc/Pcap_DNSProxy/
cp ../Release/*.txt /etc/Pcap_DNSProxy/
cp ../Release/PcapDNSProxyService /etc/init.d/
然后我们就要开始改启动脚本了,作为centos6我们需要的是PcapDNSProxyService,但是里面的start-stop-daemon是debian的玩意,不过也能在centos上安装
rpm -ivh http://down.senra.me/RPM/start-stop-daemon-1.18.2-1.el6.x86_64.rpm
然后编辑/etc/init.d/PcapDNSProxyService
Global settings
NAME=Pcap_DNSProxy
PATH=/etc/Pcap_DNSProxy
PROGRAM=/usr/sbin/start-stop-daemon
START_FLAGS=”–start –background –chuid root –exec”
STOP_FLAGS=”–stop –chuid root –exec”
这里修改的是PATH和PROGRAM,默认的PROGRAM是/sbin/start-stop-daemon,但是我们rpm安装的在/usr/sbin/中,在这个脚本里把配置文件设定为和程序同目录,所以都在PATH中
我另外改了下status部分的判断
status)
echo
/bin/ps -C Pcap_DNSProxy
if [ “$?” = “1” ];then
echo -e “nPcap_DNSProxy is not running.”
else
echo -e “nPcap_DNSProxy is running.”
fi
这样就能直接判定程序是否运行了,而不是要你自己看是否有进程活着……
下面为Debian,Debian下就比较方便了。
先后执行:
sudo apt-get install git build-essential cmake -y
sudo apt-get install -y libsodium-dev libpcap-dev libssl-dev flex bison
然后下载依赖库
LibPcap
LibEvent
Libsodium
编译完毕后直接去编译即可。